Hello friends, Today in this blog we are going to talk about Lava Iris X8 device. This device was launched in February 2015, and it comes with a 5-inch touch screen display. Prices of this device start in India from Rs. 4499. This device is powered by a 1.4GHz octa-core processor, Lava Iris comes with 2 GB RAM and 16 GB internal storage, which you can extend up to 32 GB using the micro SD card. If talking about its camera quality, it comes with 8-megapixel primary and 3 megapixels in front. The Lava Iris X8 device runs on Android version 4.4 and it has been packed with 2500mah no-removable battery. The Lava Iris x8 is a 3G smartphone, which supports a double sim card which accepts Micro SD card and Micro SIM. So, this is a special specification of this device, which is good for the average using customers.
In the previous blog, I told you a trick about rooting a lollipop device made from any Mediatek (MTK) chip without using the PC. If you do not know how to root an MTK made device, then click on this link Here... to learn how to root the MediaTek device. Lava Iris X8 is also an MTK device, and if you are the owner of this device and it has been brick during the rooting process or during flashing any custom ROM or for any other reason, and want to revert it back again. Then you are in the right place. Here I am going to explain to you how to unbrick/restore stock rom in your brick/dead lava iris device. so, first read it completely to get understand it step by step and then follow it on your dead lava iris x8 device. let's go to know how to unbrick it.
PRE-REQUIREMENTS:-
1). Your lava iris device battery should be charged up to 60 to 70% to get flash the process.
2). You should have to back up your important data from your device because after flashing this process you will permanently lose your entire data. Therefore it is better to backup data on your PC or any other device.
3). Need a PC/laptop with working internet, wifi, some tech knowledge and patience.
Caution:- If you do not follow the step-by-step process of the whole procedure or there is a mistake during the flashing process, then this will be the reason for your device to be completely shut down, and if this happens, then we are not responsible for it, Please do at your own risk. Therefore, to avoid such damage, first of all, understand the whole process, watch the video given at the end of this blog and then perform it.
HOW TO FLASH OFFICIAL STOCK ROM TO UNBRICK (OR RESTORE STOCK ROM) IN YOUR LAVA IRIS X8 DEVICE.
In this process of restoring stock ROMs in Lava Iris x8 device not only will help you to unbrick your device, but it also fixes some other errors, such as invalid IMEI number, the problem of WiFi internet, the problem of sim network, Google app accessing problem and many others, let us know how to do all this procedure to fix this problem.
Follow the following steps to unbrick your lava iris x8 device.
1). To get started, download Lava Iris X8 stock firmware ZIP package from Here... in your computer, which includes the necessary lava USB driver and SP flash tool. After downloading, extract downloaded zip file on your computer in a specific folder.To install the required Lava Iris X8 USB driver in the PC, open the extracted folder and search for the driver & install it in your PC. Now connect your phone to the switch-on mode to the PC, then you will see the drivers automatically get the download. After downloading a USB drive in PC, to check that your Android is being recognized or not by the PC, you have to go to the Control Panel and click on Device Manager to find out that the device is being detected in the "Port" option or not. If the device appears, then the lava iris x8 driver is properly installed, otherwise, you will have to install the driver again correctly.
2) After successfully installing the driver, go back to the extracted folder, open the “SP flash tools” and then double click on “SP flash.exe” to launch the flash tool window. After launching it, you will see a window like an image below, simply click on the Scatter-loading file option to search and click on the downloaded Lava Iris X8 firmware "MT6592_Android_scatter.txt" file from the extracted folder.
3) After the scatter file is loaded, to flash firmware through USB model you have to set the path, go to the “Options” in SP Flash Tools and select USB Model. In short:- Option -> DA Download All -> Speed and select High Speed by clicking on it. After setting up a USB path, switch-off your device and remove the battery and reinstall it (if it's removable), but do not the switch-on device.
once it's done. Then click the Download button on the Flash Tools window and then to get detect the device, hold the volume plus or the Volume Down button together to connect your device to the PC, once it is detected, the flashing process will begin, just you have to wait to get it completely, after the successfully flash, it shows you the right green circle, which will indicate you to flash it successfully.
4) Now close flash tool window and disconnect your phone from PC, now switch-on the device, if you follow correctly this procedure then you will see stock rom on your lava iris x8 device. Congratulation, in such way you can fix many problems like invalid IMEI number, unbrick device, dead device, Google app accessing problems, this is some errors you can fix by following these tricks. Thank you.
